Splice Sleeves

ULTRASLEEVE® PROTECTION SLEEVE

Simply load the fused fiber and close the sleeve. No heat shrink curing, crimping or gluing. Ultrasleeve® features an acrylic foam tape, which seals the sleeve and protects from damage. The Ultrasleeve® splice protector can be closed by hand and is installed after the splice is completed.

PART #

DESCRIPTION

P49-F1-FS60

60mm Splice Protection Sleeve

HEAT-SHRINK FUSION SPLICE PROTECTION SLEEVES

STANDARD SLEEVE – (3.0mm AFTER SHRINK)

This sleeve design represents the industry’s most reliable, highest quality sleeve at an economical price. Standard lengths include 60mm and 40mm. Sleeves come standard with a clear outer tube for viewing the color of the fiber itself.

PART #

DESCRIPTION

P49-F1-1002C-50

60mm, 50 pk (Clear)

P49-F1-1002RC-50

60mm, 50 pk (Red)

P49-F1-100240C-50

40mm, 50 pk (Clear)

TAPERED SLEEVE – (3.0mm AFTER SHRINK)

This newly developed sleeve offers tapered ends designed to keep the metal strength member in proper position while in use. Available in 60mm and 40mm lengths.

PART #

DESCRIPTION

P49-F1-1002T-50

60mm, 50 pk (Clear)

P49-F1-100240T-50

40mm, 50 pk (Clear)

STANDARD SLEEVE – (3.0mm AFTER SHRINK)

This sleeve design represents the industry’s most reliable, highest quality sleeve at an economical price. Standard lengths include 60mm and 40mm. Sleeves come standard with a clear outer tube for viewing the color of the fiber itself.

PART #

DESCRIPTION

P49-F1-1002C-50

60mm, 50 pk (Clear)

P49-F1-1002RC-50

60mm, 50 pk (Red)

P49-F1-100240C-50

40mm, 50 pk (Clear)

TAPERED SLEEVE – (3.0mm AFTER SHRINK)

This newly developed sleeve offers tapered ends designed to keep the metal strength member in proper position while in use. Available in 60mm and 40mm lengths.

PART #

DESCRIPTION

P49-F1-1002T-50

60mm, 50 pk (Clear)

P49-F1-100240T-50

40mm, 50 pk (Clear)

SLIM SLEEVE – (2.5mm AFTER SHRINK)

These clear protection sleeves use reduced diameter components for a smaller finished product. The smaller diameter allows users to fit more splices into existing splice trays.

PART #

DESCRIPTION

P49-F1-S25C-50

60mm, 50 pk (Clear)

P49-F1-S2540C-50

40mm, 50 pk (Clear)

MICRO SLEEVE – (1.5mm After Shrink) & MINI SLEEVE – (2.0mm After Shrink)

This newly developed sleeve offers tapered ends designed to keep the metal strength member in proper position while in use. Available in 60mm and 40mm lengths.

PART #

DESCRIPTION

P49-MCRO140CFD-50

Micro 40mm, 50 pk (Clear)

P49-MCRO125CFD-50

Micro 25mm, 50 pk (Clear)

P49-MINI140CDS-50

Mini 40mm, 50 pk (Clear)

P49-MINI125CDS-50

Mini 25mm, 50 pk (Clear)

SLIM SLEEVE – (2.5mm AFTER SHRINK)

These clear protection sleeves use reduced diameter components for a smaller finished product. The smaller diameter allows users to fit more splices into existing splice trays.

PART #

DESCRIPTION

P49-F1-S25C-50

60mm, 50 pk (Clear)

P49-F1-S2540C-50

40mm, 50 pk (Clear)

MICRO SLEEVE – (1.5mm After Shrink) & MINI SLEEVE – (2.0mm After Shrink)

This newly developed sleeve offers tapered ends designed to keep the metal strength member in proper position while in use. Available in 60mm and 40mm lengths.

PART #

DESCRIPTION

P49-MCRO140CFD-50

Micro 40mm, 50 pk (Clear)

P49-MCRO125CFD-50

Micro 25mm, 50 pk (Clear)

P49-MINI140CDS-50

Mini 40mm, 50 pk (Clear)

P49-MINI125CDS-50

Mini 25mm, 50 pk (Clear)

RIBBON SPLICE PROTECTION SLEEVE

INS offers two ribbon sleeve styles: Dual Strength Member and Single Strength Member. The Dual Strength Member design eliminates any undue stress on the ribbon, creating a perfectly flat exit for the ribbon. Available with a ceramic strength member.

PART #

DESCRIPTION

P49-F1-10112DP-50

Dual Member 40mm, 50pk (Clear)

P49-F1-10112CP-50

Single Member 40mm, 50pk (Clear)

DIELECTRIC SPLICE PROTECTION SLEEVE - (3.0mm After Shrink)

Our Dielectric sleeves are manufactured with a non-metallic strength member for the ultimate in corrosion and electrical resistance.

PART #

DESCRIPTION

P49-F1-DE60-50

60mm, Clear

P49-F1-DE40-50

40mm, Clear