Mandrels

INS UNIVERSAL 100x MICROSCOPE

The INS Universal Microscope is provided with a 2.5mm universal faceplate. Insert the ferrule into the microscope and inspect the end face with ease. This complete 100x microscope is perfect for multimode connectors and is easy to use.

PART #

DESCRIPTION

P49-F1-VSF25

LED Fiber Inspection Scope with Universal 2.5mm UPC/APC Adapter for SC/ST/FC

P49-F1-VSF125

LED Fiber Inspection Scope with Universal 1.25mm UPC/APC Adapter for LC/MU

INS 200x MINI FIBER MICROSCOPE

Utilize this compact scope to inspect connector ferrule end faces for dirt, debris or oils that may interfere with signal transmission. Scope has both Oblique and Coaxial white LED lighting.

Includes: Microscope,(3) 1.5v LR44 Button Batteries, 2.5mm adapter, 1.25mm adapter

PART #

DESCRIPTION

P49-F1-MS200U

Compact 200x Microscope

INS 200x AND 400x MICROSCOPE

These low cost, high quality microscopes are available in 200x or 400x magnification, and utilize white LED light to provide coaxial illumination of connector end faces. Three AAA batteries provide more than 40 hours of use before battery replacement is required. Provided with a universal 1.25mm and a 2.5mm adapter, with other connector styles available. Dimensions: 8.76”L x 2.16”H

PART #

DESCRIPTION

P49-F1-VS200U

200x Microscope with 1.25mm and 2.5mm Universal Adapter

P49-F1-VS400U

400x Microscope with a 1.25mm and 2.5mm Universal Adapter

INS UNIVERSAL TESTING SLEEVE

Designed specifically for testing applications, the INS Universal Testing Sleeve reduces labor time while testing fiber optic patch cables with standard for 2.5mm ferrules. Adapters for ST or FC reference cord are available.

PART #

DESCRIPTION

P49-F1-81UNIV

INS ST to 2.5mm Universal Test Adapter

P49-F1-85UNIV

INS FC to 2.5mm Universal Test Adapter

INS MULTIMODE MANDRELS

The use of mandrels in multimode insertion loss testing helps to ensure the proper launch condition into the fiber under test. By wrapping the fiber around the correct size mandrel, high order modes are stripped out and low order modes are spread out to achieve the desired launch conditions for testing. Each includes the mandrel and clip for holding the cable firmly in place during testing. Accepts jacket diameters from 1.6mm to 3.0mm and for use both OM1, OM2 cable.

PART #

DESCRIPTION

P49-F1-MM6250

62.5/125μm and 50/125μm Mandrel Kit

P49-F1-CCM04

4mm ClearCurve Mandrel (1.6 -2.0mm jacket recommended)